System components

COVERiT Pre-grown green roof

Pre-grown greenery: pre-planted sedum trays for flat roofs and roofs pitched up to 15°, in three versions. On delivery the trays are at least 95 % covered.

Sedum-planted standard green roof tray with a black HDPE container and a profiled lower edge
Product image edited with AI assistance.

Three versions

  • Sedum-planted standard green roof tray with a black HDPE container and a profiled lower edge

    KLICK ’N GO

    Pre-grown greenery. Tray by tray.

    Standard green roof
    Sedum trays made of HDPE, 45 × 49.5 cm
    For roofs up to 15° pitch

  • Sedum-planted lightweight green roof tray with a dark porous polyurethane foam container and a profiled lower edge

    PLACE ’N GO

    A green roof with a lightweight foam carrier.

    Lightweight green roof
    Sedum trays on a PU foam carrier, 50 × 50 cm
    System component for EPDM roof waterproofing
    For roofs up to 15° pitch

  • Shallow rectangular KLICK ’N GO LIGHT tray planted with sedum

    KLICK ’N GO LIGHT

    Pre-grown sedum tray, 37.3 × 57.3 cm.

    Pre-grown green roof element
    Sedum tray, 37.3 × 57.3 cm

Product images edited with AI assistance based on original references.

Product images edited with AI assistance based on original references.

Applications

  • Flat and pitched roofs

    KLICK ’N GO and PLACE ’N GO for flat roofs and roofs pitched up to 15°.

  • Timber structures

    PLACE ’N GO for timber structures that cannot take a full load: 57.5 kg/m² saturated instead of 80 kg/m² for KLICK ’N GO.

  • Lightweight build-up with NovoWeld

    PLACE ’N GO with the penetration-free mechanical fastening system NovoWeld and COVERiT EPDM waterproofing forms a lightweight waterproofing construction.

  • With 3D sheets

    A complement to the 3D waterproofing sheets made of NovoProof® rubber membranes of up to 1,500 m² in one piece.

The trays are delivered fully planted and laid directly on the waterproofed roof. They carry 6 to 8 sedum species on a special substrate; sedum stores water in its leaves.

Key figures compared

Values from the KLICK ’N GO and PLACE ’N GO information sheets (05/2023). Minimum order according to the price list: 1 pallet; prices on request. There is no information sheet for KLICK ’N GO LIGHT (37.3 × 57.3 cm); key figures on request.

  • Saturated weight KLICK ’N GO 80 kg/m² (18 kg per tray) · PLACE ’N GO 57.5 kg/m² (14.4 kg per tray)
  • Dry weight KLICK ’N GO 53 kg/m² (12 kg per tray) · PLACE ’N GO 30 kg/m² (7.5 kg per tray)
  • Water storage KLICK ’N GO approx. 28–32 l/m² · PLACE ’N GO 27.5 l/m²
  • Height KLICK ’N GO 8.5 cm · PLACE ’N GO 7–9 cm
  • Trays per m² KLICK ’N GO 4.4 (45 × 49.5 cm) · PLACE ’N GO 4 (50 × 50 cm)
  • Pallet 100 × 100 cm KLICK ’N GO 58 trays, 13.12 m² · PLACE ’N GO 70 trays, 17.5 m²

KLICK ’N GO: The build-up

Account for load-bearing capacity and the saturated system weight.

  • Pre-grown sedum cassette with a rigid dark carrier

    HDPE carrier

    Pre-grown sedum trays made from HDPE, complete with growing substrate.

  • Detail of the dark cassette carrier with overhanging sedum plants

    Click together

    The trays interlock with stepped edges. A protective layer beneath the trays protects the waterproofing.

  • Plan the roof build-up

    Dimensions and loads are listed in the information sheet.

Product images partly edited with AI assistance

Product images partly edited with AI assistance

PLACE ’N GO: The build-up

Particularly suited to timber structures with limited spare load capacity. Check load-bearing capacity and saturated weight. Any combination with NovoWeld must suit the specified waterproofing build-up.

  • Pre-grown sedum cassette on a low porous foam carrier

    Lightweight build-up

    Pre-grown sedum trays made from polyurethane foam.

  • Detail of the porous foam edge with sedum plants growing above it

    Place side by side

    Place the trays directly next to each other. No specialist installation tools are required.

  • Coordinate the roof build-up

    A drainage layer underneath drains rainwater.

Product images partly edited with AI assistance

Product images partly edited with AI assistance

Laying the pre-grown green roof

  • Check the load-bearing capacity Include the saturated weight from the key figures in the load assumptions of the roof structure.
  • Protect the waterproofing For KLICK ’N GO, COVERiT recommends a protective sheet beneath the trays.
  • Lay the trays KLICK ’N GO trays click together; a stepped edge joins the trays. PLACE ’N GO trays are placed directly next to each other on the roof. No special tools are required.
  • Plan the edge row For KLICK ’N GO, allow 49.5 × 49.5 cm per tray in the outer row.
  • Hand over On delivery the trays are at least 95 % covered. The client can accept the roof directly after laying.

According to the information sheet, two to three workers lay 200 to 300 m² of green roof per day. As the trays are pre-grown, greening is possible even in the hot summer months.

Planning documents

Reset search and filters

Additional filters

Document type
Document type
Scope
Scope
File format
File format

2 / 2

Browse all downloads →

of

Enquire about the pre-grown green roof