COVERiT NovoProof®

DA-K

Fleece-backed EPDM roll membrane

For lightweight roof structures.

Light and robust. Weighing only 1.7 kg/m² (1.3 mm), COVERiT NovoProof® DA-K membrane is not only easy to lay but is particularly suited to the lightweight construction of roofs of all kinds.

View all DA-K versions in the shop

Choose a version Planning documents

Shop name: NOVOtan DA-K.

Two EPDM rolls with light fleece backing, black edge strips and an unrolled black membrane — Product image edited with AI assistance.

Applications

Roof waterproofing
Without ballast
Green roofs
Under wearing layers
Lightweight roof structures
Special roof shapes
All types of substructure
New construction and refurbishment
Balconies and terraces
Structural waterproofing
Structural waterproofing and parking decks
External waterproofing of tunnels, bridges and underpasses
Waterproofing of building elements in contact with the ground (DIN 18533)
Waterproofing of indoor areas (DIN 18534)
EN 13501-5 Broof (t1) for tested constructions

At a thickness of 1.3 mm, DA-K weighs approximately 1.7 kg/m² and is suitable for lightweight roof structures.

Fixing DA-K

Laying methods

Bonded
Choose the system adhesive and application method to suit the substrate.
Mechanically fastened
Arrange fasteners according to the project-specific wind uplift design.
With ballast
The specified gravel, green roof or trafficable layer secures the loose-laid membrane.
Loose-laid
The waterproofing is laid loose; the seams are joined with ThermoFast®.

Installation steps

Choose the adhesive Use Adhesive F in the field; Contact adhesive TA or suitable spray contact adhesive at connections.
Set the fixings Use approved fixings in the covered seam area. Select type and quantity for the substrate and wind-uplift design.
Check the substrate Do not use Adhesive F on unfaced polystyrene, bare bituminous torch-on membranes or hot-applied bitumen coatings.
Fix the edges Bonded or mechanically fixed: also fix roof edges, valleys, upstands and roof penetrations linearly with suitable, approved fixings, 4 per metre (see the installation guide).
Hot-air weld seams ThermoFast® seams are weldable under site conditions down to approx. −10 °C; carry out trial welds first. Rolls come with a ThermoFast® joining edge along the long side. Also for balconies and terraces.

Select DA-K

Choose thickness

1.3 mm 0.27 kg/m² lighter Weight per area1.70 kg/m²Tear resistance≥ 50 N 1.5 mm Higher tear resistance Weight per area1.97 kg/m²Tear resistance≥ 60 N

Use only in an approved roof build-up; data sheet 07/2025.

The product data sheet 07/2025 lists use to DIN 18531 (waterproofing of roofs with and without use) for the product, without distinguishing between thicknesses.

Choose width

1.30 m For the main roof area 0.65 m Edges and corners 0.43 m Additional delivery width

Use 0.65 m where required, according to the fastening plan.

Choose length

Choose the required roll length and open the shop item.

20 m 200 m

Your selection

DA-K · 20 m

1.3 mm · 1.30 m wide

312 m² per pallet

Item number: 02007.1

View in shop

Additional variants

Other version

DA-K · 200 m

1.3 mm · 0.65 m wide

Facade strip, new embossing. There is no approval for façades in Germany.

Item number: 03098

View in shop

Your selection opens the matching shop item. Prices and ordering eligibility are shown in the shop. DA-K is not available as a sheet; see the alternatives for sheets.

View all DA-K versions in the shop

Compatible system products

Select preformed parts, penetrations and drainage to suit the connection design. Use EPDM versions. For seams and connections as per the data sheet: NovoProof® connection paste, cover tape, rubber support strip and composite metal sheets.

Surface adhesive F
For bonding the fleece backing of DA-K and DA-S membranes to the roof surface.
Use only on suitable, tested substrates as specified in the adhesive instructions. Not for unfaced polystyrene, bare bituminous welding sheets or hot bitumen coatings.
Product details View adhesives in the shop
Connection adhesives
Spray contact adhesive or Contact adhesive TA for upstands and connections.
Image: spray contact adhesive. Contact adhesive TA is a separate liquid product. Prepare absorbent substrates and metals according to the adhesive instructions.
Product details View adhesives in the shop
Seam fastening
Plates and fasteners for mechanical fixing at membrane seams.
Tested fasteners and plates. The substrate, insulation and wind loads determine the system and fixing layout.
Product details Request ordering information
Preformed parts
Corners and sleeves for parapets, chimneys and rooflights. Prefabricated, including made-to-measure parts.
Product details View in shop
Roof drainage
Drain rainwater from the roof. Select an EPDM flange and outlet to suit the roof build-up and drainage design.
Product details View in shop
Roof penetrations
Route vents and cables through the roof. With a weldable NovoProof® EPDM sleeve.
Product details View in shop

Product images partly edited with AI assistance

Compare roll membranes

Backing and installation method determine which membrane suits the roof build-up.

Flame-retardant describes the material. Fire performance evidence applies to the tested roof build-up.

Also as sheet
DA
Loose-laid under ballast. Unbacked. For gravel, green roofs and trafficable layers.
Thickness1.2 mm1.3 mm1.5 mm2.0 mm
Product details View DA in the shop
Also as sheet
DA-F
For exposed roofs. Flame-retardant. Without ballast in a tested roof assembly. Unbacked.
Thickness1.3 mm1.5 mm
Product details View DA-F in the shop
DA-SK
Adhesive already on the membrane. Fully bond to a prepared substrate; use primer where required.
Thickness1.5 mm
Product details View DA-SK in the shop
DA-FG
Directly on unfaced EPS. No additional fire-protection layer in the specifically tested assembly.
Thickness1.3 mm1.5 mm
Product details View all DA-FG versions in the shop
DA-S
Thick fleece for rough substrates. Existing roof layers may remain after assessment.
Waterproofing layer1.3 mm1.5 mm
Overall thickness2.5 mm2.7 mm
Product details View all DA-S versions in the shop
Current product
DA-K
Fleece backing for bonded roofs. Also suitable for mechanical fixing or laying under ballast.
Thickness1.3 mm1.5 mm
View all DA-K versions in the shop

Product images partly edited with AI assistance

Compare sheets

Large-area sheets reduce on-site seam welding and detailing.

DA-P
Sheet for gravel or green roofs. Laid loose in one piece.
Thickness1.2 mm1.3 mm1.5 mm2.0 mm
Product details View all DA-P versions in the shop
DA-F Sheet
Made-to-measure, also without ballast. Induction-fixed in a tested roof assembly.
Thickness1.3 mm1.5 mm
Product details View all DA-F versions in the shop

Product images partly edited with AI assistance

Discuss DA-K and your roof build-up

Call us Email us

For lightweight roof structures.

Roof waterproofing

Without ballast

Green roofs

Under wearing layers

Lightweight roof structures

Special roof shapes

All types of substructure

New construction and refurbishment

Balconies and terraces

Structural waterproofing

Structural waterproofing and parking decks

External waterproofing of tunnels, bridges and underpasses

Waterproofing of building elements in contact with the ground (DIN 18533)

Waterproofing of indoor areas (DIN 18534)

EN 13501-5 Broof (t1) for tested constructions

Bonded

Mechanically fastened

With ballast

Loose-laid

Select DA-K

DA-K · 20 m

Additional variants

DA-K · 200 m

Planning documents

NovoProof DA-S / DA-K / DA-FG - P-3230-1245-MPA BS

NovoProof DA-S / DA-K - P-20150075-03-MPA DD

Surface adhesive F

Connection adhesives

Seam fastening

Preformed parts

Roof drainage

Roof penetrations

DA

DA-F

DA-SK

DA-FG

DA-S

DA-K

DA-P

DA-F Sheet