COVERiT NovoProof®
TE
EPDM membrane for ponds and biotopes
For ponds and biotopes.
A product data sheet and a declaration of performance for NovoProof® TE are not currently available. The information shown here is taken from the tender specifications dated 18 February 2025.
Applications
Biotopes
Swimming ponds and fish ponds
Biopools
Water retention basins
Streams
Clarification tanks and containers
Installing TE
Laying methods
Installation steps
- Buried at the pond edge Carry the membrane beyond the bank slope into an excavated trench and backfill the trench.
- Connected to components Connect using a clamping rail made of non-corroding material or as a fixed/loose flange assembly to DIN 18533-1.
Prefabricated at the factory into large, made-to-measure sheets with a ThermoFast® joining edge and laid loose. Seal pipe penetrations with a factory-prefabricated NovoProof® sleeve, secure with a stainless steel clamp and seal with NovoProof® connection paste.
Planning & tendering
NovoProof® TE to DIN EN 13361 is to be used for biotopes, swimming ponds and fish ponds, biopools, water retention basins, streams, and clarification tanks and containers.
4 / 4
Full-text search is temporarily unavailable. This list is searched by titles and summary details only; the filters still work.
Unknown filters were not applied.
- Tender specification
NovoProof
09/2026
- Installation guide
COV-SG
01/2020
- Test report
DA/DA-P - 1.3 mm
Test report dated 17 November 2020, valid until 17 November 2030
- Test report
NOVOtan DA-P
7 March 2013; analysis AA-13-24/1; sample received 27 February 2013
TE
EPDM membrane for ponds and biotopes
Homogeneous elastomer membrane for pond and biotope waterproofing, prefabricated into made-to-measure sheets.
Pond and biotope waterproofing with factory-prefabricated EPDM sheets.
Contact us for ordering information