Your selection
DA-F
1.3 mm
Item number: 01003.12
COVERiT NovoProof®
DA-F Sheet
Made-to-measure, flame-retardant EPDM sheet
Fix it without piercing the sheet.
Applications
Roof waterproofing
Without ballast
Green roofs
Under wearing layers
All types of substructure
New construction and refurbishment
EN 13501-5 Broof (t1) for tested constructions
DA-F sheet: From plan to roof
Laying methods
Installation steps
- Measure and calculate wind uplift Survey the roof and details. The project-specific calculation determines plate quantity and positions.
- Prefabricate and prepare Integrate agreed connection details at the factory. Install specialist plates to the roof fixing plan.
- Induction-bond Unroll the sheet and bond it to the plates. Close remaining seams and connections; inspect the area.
This sequence is for induction fixing. BROOF(t1) applies only to tested roof assemblies. Sheets are prefabricated to size at the factory. Hot-air weld ThermoFast® seams, weldable under site conditions down to approx. −10 °C; carry out trial welds first.
Choose your DA-F sheet
View in shop
Prices and ordering eligibility are shown in the shop.
Planning documents
Declarations of performance: DA-F to EN 13956, dated July 2025. Product data sheet dated July 2025 (DE); in data sheets the DA-F sheet is also called DA-PF. Reaction-to-fire class E to EN 13501-1. Details and supporting documents depend on the roof build-up. FLL test report 23/20: The tested NovoProof DA-F/DA-PF 1.3 mm variant is root-resistant and rhizome-resistant, without added biocides. The evidence is bound to the specimen and jointing method. According to the manufacturer's product data sheet, 07/2025: resistant to ozone and UV, and to fungi and algae, microorganisms and humic acid. Evidence applies only to the tested product variant and jointing method.
9 / 9
Full-text search is temporarily unavailable. This list is searched by titles and summary details only; the filters still work.
Unknown filters were not applied.
- Product data sheet
DA-F / DA-PF
07/2025
Earlier editions (1)
DA-F / DA-PF
09/2020
- Product information
DA-P / DA-F
06/2023
- DoP roofing
DA-F - 1.3 mm
07/2025
Earlier editions (1)
DA-F - 1.3 mm
09/2020
- DoP roofing
DA-F - 1.5 mm
07/2025
Earlier editions (1)
DA-F - 1.5 mm
09/2020
- Installation guide
COV-SG
01/2020
- Tender specification
DA-F - Sheet
18.02.2025
- Test report
DA-F/DA-PF - 1.3 mm
Test report dated 17 November 2020, valid until 17 November 2030
- Test certificate
- Germany
NovoProof DA-F - P-20150075-02-MPA DD
Valid 2021–2026
Applies to NovoProof DA-F (sheet and pre-made membrane).
PDF to follow
- Environmental product declaration
NovoProof EPDM
3 June 2025; valid until 2 June 2030
Compatible system products
Select preformed parts, penetrations and drainage to suit the connection design. Use EPDM versions. For seams and connections as per the data sheet: NovoProof® connection paste, cover tape, rubber support strip and composite metal sheets.
Contact adhesive TA
For bonding upstands and connection details.
Preformed parts
Corners and sleeves for parapets, chimneys and rooflights. Prefabricated, including made-to-measure parts.
Roof drainage
Drain rainwater from the roof. Select an EPDM flange and outlet to suit the roof build-up and drainage design.
Roof penetrations
Route vents and cables through the roof. With a weldable NovoProof® EPDM sleeve.
NovoWeld
Induction fastening without penetrating the waterproofing. For approved roof build-ups only.
Product images partly edited with AI assistance
Compare roll membranes
Backing and installation method determine which membrane suits the roof build-up.
Flame-retardant describes the material. Fire performance evidence applies to the tested roof build-up.
Also as sheetDA
Loose-laid under ballast. Unbacked. For gravel, green roofs and trafficable layers.
Thickness1.2 mm1.3 mm1.5 mm2.0 mm
Also as sheetDA-F
For exposed roofs. Flame-retardant. Without ballast in a tested roof assembly. Unbacked.
Thickness1.3 mm1.5 mm
DA-SK
Adhesive already on the membrane. Fully bond to a prepared substrate; use primer where required.
Thickness1.5 mm
DA-FG
Directly on unfaced EPS. No additional fire-protection layer in the specifically tested assembly.
Thickness1.3 mm1.5 mm
DA-S
Thick fleece for rough substrates. Existing roof layers may remain after assessment.
Waterproofing layer1.3 mm1.5 mm
Overall thickness2.5 mm2.7 mm
DA-K
Fleece backing for bonded roofs. Also suitable for mechanical fixing or laying under ballast.
Thickness1.3 mm1.5 mm
Product images partly edited with AI assistance
Compare sheets
Large-area sheets reduce on-site seam welding and detailing.
DA-P
Sheet for gravel or green roofs. Laid loose in one piece.
Thickness1.2 mm1.3 mm1.5 mm2.0 mm
Current product
DA-F Sheet
Made-to-measure, also without ballast. Induction-fixed in a tested roof assembly.
Thickness1.3 mm1.5 mm
Product images partly edited with AI assistance